1. Home
  2. Expert Estimation
  3. Cost Estimates
  4. Cost Estimate – Ribbon Menu

Cost Estimate – Ribbon Menu

The contextual ribbon menu for Cost Estimates provides access to a vast array of functions that allow you to add, modify and analyse Cost Estimate lines.

A number of functions found in the ribbon menu can also be found in the right-click context menu.

Note: Functions that modify the contents of a Cost Estimate will be unavailable until the Item State has changed to Unfinished. This can be identified by the alert banner that appears at the top of the window.

Cost Estimate – ribbon menu

General Group

Name Description
Paste
Ctrl + V
Clicking the Paste button will insert the information from the clipboard into a new line, above the selected line.

If the data was copied from a Cost Estimate within Expert Estimation it will be pasted into a new line along with any resources used.

When data is copied from an external application, the Paste Special window will be displayed allowing you to map into which columns the copied information is to be pasted.

Paste Cell
Ctrl + Shift + V
Pastes information from the clipboard into the cells specified.

The Paste Cell button can be accessed from the sub-menu underneath the Paste button.

Copy
Ctrl + C
Clicking the Copy button will copy the selected Cost Estimate line information to the clipboard.

This allows you to paste the data into Expert Estimation or to an external application.

Undo
Ctrl + Z
Clicking the Undo button reverses the last change made to the data.
Redo
Ctrl + Y
The Redo button becomes available when an undo action is performed and is used to reverse the undo action.
Save
Ctrl + S
When the Save button is clicked, changes made to the Cost Estimate since opening will be saved to the project.

At this point any other users will be able to see the changes made upon opening the Cost Estimate.

Properties
Alt + Enter
Clicking the Properties button will open the Properties pane on the right-hand side of the window.

This will display a Cost Estimate lines properties whilst also allowing for the display of summarised data where multiple lines are selected.

Item Formatting Group

Name Description
Bold
Ctrl + B
Will toggle the bolding property for the currently selected lines.
Italicize
Ctrl + I
Applies or removes italic formatting on the text of the selected lines.
Underline
Ctrl + U
Generates or clears an underline below the specified text.
Highlight
Ctrl + H
Applying a highlight to better distinguish Cost Estimate lines can be done by clicking the Highlight button.

The highlight colour is customized by clicking the arrow to the right of the text and selecting a new colour.

Selecting the function again will remove the formatting.

Editing Group

Name Description
Insert Line
Ctrl + Insert
Inserts a new line above the specified line in the Cost Estimate window.
Insert Multiple Estimate Lines
Ctrl + Shift + Insert
Opens a dialogue window that allows you to choose the number of lines to insert above the current position in the Cost Estimate.

The Insert Multiple Estimate Lines button can be accessed by clicking the arrow underneath the Insert Line button.

Add Line
Ctrl + Shift + =
Clicking the Add Line button will add a line to the bottom of the Cost Estimate.

The Add Line button can be accessed by clicking the arrow underneath the Insert Line button.

Remove Line
Ctrl + Del
Deletes the selected line from the Cost Estimate window.
View Resource Cost Estimate
Ctrl + E
Clicking the View Resource Cost Estimate button opens the Cost Estimate for the selected line’s group resource, allowing you to view or build up its cost.

This button is only available when a single Cost Estimate line using a Group Resource is selected.

Item Resource Properties
Ctrl + R
Opens the Edit Resource dialogue, displaying significant properties of the resource applied to the selected Cost Estimate line.

This allows you to make modifications to the details of a resource without accessing the Resource Explorer window.

This button is only available when a single Cost Estimate line using a Resource is selected.

Clone Item’s Resource
Ctrl + Alt + R
The Clone function allows you to create an alternative Resource based off the resource currently assigned to a Cost Estimate line.

Once the cloning process has completed, the new resource is applied to the Cost Estimate line.

This button is only available when a single Cost Estimate line using a Resource is selected.

Question Defines Opens the Question Defines window allowing you to manage Question Defines associated with the Cost Estimate.

Question Defines are only available in Direct Cost, Overhead Cost and Group Resource Cost Estimates.

Express and Genesis editions only.

Previous
Ctrl + Left Arrow
Navigates to the previous Cost Schedule item that contains a Cost Estimate.

The previous Cost Schedule item is ordered based on the Cost Schedule Line Number.

The Previous function is only available for Schedule based Cost Estimate.

Next
Ctrl + Right arrow
Navigates to the next Cost Schedule item that contains a Cost Estimate.

The next Cost Schedule item is ordered based on the Cost Schedule Line Number.

The Next function is only available for Schedule based Cost Estimate.

Display Group

Name Description
Item Details Adds a banner at the top of the window that displays the information about the item the Cost Estimate is associated with.

Note: The Item Details button is changed to Resource Details if the Cost Estimate is linked to a group resource.

Restore Layout If columns have been removed, adjusted or relocated, clicking the Restore Layout button will restore columns to their default layout.
Add Unit Rate Column The Add Unit Rate Column button opens a sub-menu that allows you to add summary columns for selected units to the Cost Estimate window.

The Unit Rate column will show the rate that the unit is used per Cost Estimate line.

Express and Genesis editions only.

Add Unit Column Clicking the Add Unit Column button opens a sub-menu that allows you to add summary columns for selected units to the Cost Estimate window.

Each column will display the total usage of the unit(s) selected on each Cost Estimate line.

Express and Genesis editions only.

Schedule Group

Name Description
Unfinish
Ctrl + 1
Clicking the Unfinish button will change the state of the Cost Schedule Item or Group Resource to Unfinished, allowing the Cost Estimate to be edited.

An Unfinished state suggests that the estimating is not yet complete. Unfinished Items are not included in the Spread Calculations.

This state change will also be reflected in the Cost Schedule.

Check
Ctrl + 2
Clicking the Check button will change the state of the Cost Schedule Item or Group Resource to Checked, preventing any changes from being made to the Cost Estimate.

Note: When changing from Unfinished to Checked the application will automatically save the Cost Estimate.

This state change will also be reflected in the Cost Schedule.

Finish
Ctrl + 3
Clicking the Finish button will change the state of the Cost Schedule Item or Group Resource to Finished, preventing any changes from being made to the Cost Estimate.

Note: When changing from Unfinished to Finished the application will automatically save the Cost Estimate.

This state change will also be reflected in the Cost Schedule.

Cost Estimate Group

Name Description
Mode The Mode drop-down menu allows you to define the mode of calculation the Cost Estimate will calculate in.

Changing the Estimate Mode of a Cost Estimate will adjust the available columns for determining the Resource Quantity used on each Cost Estimate Line.

The available estimating modes are Quantity, Production and Time.

Genesis edition only.

Total When working with Cost Estimates for Cost Schedule items you are able to change how the Total of a Cost Estimate is applied to the Cost Schedule item.

By default the Total will represent the Total of a Cost Schedule item, however, you can change this to be Rate in which the Cost Schedule item will multiply the total value of the Cost Estimate by the quantity to produce the Estimated Total for the Cost Schedule item.

This function is only available within Cost Schedule based Cost Estimates.

Express and Genesis editions only.

Properties Group

Name Description
Excluded
Ctrl + 4
The Excluded button will toggle the selected cost estimate’s excluded property on or off.

If an item is excluded it will not contribute to the Cost Estimate total, however, it will not be removed from the Cost Estimate.

Name Description
Create Pressing the Create button opens a sub-menu that allows you to create other project elements that relate to the Cost Estimate currently in focus.
Take Off Set Within the Create sub-menu, there is an option to quickly create a new Take Off Set. The creation process is the same as if you were within the Take Off Sets window. However, upon creation, the new Take Off Set Calculation Sheet is opened to allow quick editing.
Go to Definition
Ctrl + Shift + G
The Go to Definition button will navigate you to the define referenced on a line.

Note: This may take you to another tab where the define is registered such as Global Defines or Take Off Defines.

If more than one define is used, the Go to Definition button will open the Navigate to define source dialogue.

From this window, you can select the define you wish to navigate to.

Go to Resource
Ctrl + Shift + R
Pressing the Go to Resource button will open the Resource Explorer and filter the grid to display the resource currently used on the selected item.

Help Group

Name Description
SavvyHelp
F1
Selecting the SavvyHelp button will open the SavvyHelp pane on the right of the window.

This will display useful information about the Cost Estimate window as well as links to definitions for properties of the Cost Estimate.

Updated on April 10, 2019

Was this article helpful?

Related Articles

Leave a Comment